The Occupational Health and Safety Administration (OSHA) enforces electrical safety regulations in the United States. Although OSHA has not adopted and does not mandate NFPA 70E compliance it possible you can still be cited for non-compliance?
OSHA’s authority to cite a company or an individual stems from the occupational Safety and Health Act in particular Section 5(a)(1) and 29 CFR 1910.2(g).
Section 5(a)(1) “The general Duty Clause” of the Occupational Health and Safety act, states that employers "shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees". This is the clause most cited by OSHA where unsafe work conditions are found to exist.
Another area where OSHA can fine companies or individuals for not abiding by national consensus standards. A consensus is a method by which an entire group of people can come to an agreement. The input and ideas of all participants are gathered and synthesized to arrive at a final decision acceptable to all.
Section 29 CFR 1910.2(g) states a "National consensus standard" means any standard or modification thereof which has been adopted and promulgated by a nationally recognized standards-producing organization under procedures whereby it can be determined that persons interested and affected by the scope or provisions of the standard have reached substantial agreement on its adoption”.
NFPA 70E is considered a national consensus standard and as such, non compliance leaves employers open for citation under Section 29 CFR 1910.2(g) if they are found not to be in compliance.
IRISS Electrical Maintenance Safety Devices help companies comply with NFPA 70E by ensuring closed cabinet fully energized inspections of critical switchgear. For more information on how IRISS can help you comply with OSHA requirements relating to energized inspections and maintenance of your critical assets visit our website - www.iriss.com.